64 found, showing page 2 of 5
$77.49
SIZE #0 CUTTING TIP
Features copper shells machined from solid bar stock (not tubing). Thick shell flange. Extra heavy-duty shell end where the tip takes the most abuse. Larger diameter decreases preheat time and maintains the cut on painted or rusty plates. Course "V" splines cut better, resist clogs and makes cleaning easier. Tips fit Forney 1680, 1702, 1705, 1707 and 1753 Torch Kits and Victor compatible equipment.
View Details
$73.098
SIZE #1 CUTTING TIP
Features copper shells machined from solid bar stock (not tubing). Thick shell flange. Extra heavy-duty shell end where the tip takes the most abuse. Larger diameter decreases preheat time and maintains the cut on painted or rusty plates. Course "V" splines cut better, resist clogs and makes cleaning easier. Tips fit Forney 1680, 1702, 1705, 1707 and 1753 Torch Kits and Victor compatible equipment.
View Details
$75.471
SIZE #2 CUTTING TIP
Features copper shells machined from solid bar stock (not tubing). Thick shell flange. Extra heavy-duty shell end where the tip takes the most abuse. Larger diameter decreases preheat time and maintains the cut on painted or rusty plates. Course "V" splines cut better, resist clogs and makes cleaning easier. Tips fit Forney 1680, 1702, 1705, 1707 and 1753 Torch Kits and Victor compatible equipment.
View Details
$37.49
1# 3/32 6013 ELECTRODE
Mild steel "Superweld" is an all-position, general purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Small sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel where ease of operation and good appearance is required. Great for light gauge metal, sheet metal, duct-work, etc.
View Details
$38.99
1# 3/32 7018 ELECTRODE
Mild steel "Low Hydrogen" welding rods easily produce quality results on smaller amperage AC (Alternating Current)/DC (Direct Current) welders. Suitable for all positions on hardenable steels where no pre-heat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod. Reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium, and high carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches, and chassis.
View Details
$34.99
1# 1/8 7018 ELECTRODE
Mild steel "Low Hydrogen" welding rods easily produce quality results on smaller amperage AC (Alternating Current)/DC (Direct Current) welders. Suitable for all positions on hardenable steels where no pre-heat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod. Reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium, and high carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches, and chassis.
View Details
$46.49
16OZ NOZZLE GEL
Does not clog orifices and threads, eliminates erratic operation. For use on fixtures of semi- and automatic welders. Odorless, non-flammable, non-toxic and silicone free. Will not cause porosity.
View Details
$30.99
1/2LB BRAZING FLUX
For use with all flame torches. Easy clean for solid, dense brazing jobs. Borax type. 1/2 lb. (pound) reusable plastic container.
View Details
$248.99
10LB .030 MIG WIRE
ER 70S-6 mild steel MIG (GMAW) welding wire is a high strength mild steel MIG wire. Ideal for auto body repair and fabrication on most ferrous metals. Contains a high level of manganese and silicon for a superior weld, even on rusty, dirty steel. Produces a smooth bead which requires less grinding. Not recommended for aluminum engines. Required Shielding Gas: Argon/CO2.
View Details
$97.49
ALUMINUM BRAZING ROD
Braze aluminum and zinc-based metals with an oxy-acetylene or propane torch set-up. No flux needed. Ideal for irrigation pipes, aluminum boats, camper covers, lawn mower housings and casings (including aluminum magnesium). Melting point: 732 F (Degree Fahrenheit). 8 rods per pack.
View Details
$158.99
WELDING HELMET
The Bandit II welding helmet. Lightweight, durable polymer material. 4-1/2" x 5-1/4" fixed front. Ratchet headgear, clear lens, and #10 shade lens included.
View Details
$29.49
1" .030MIG CONTACT TIP
Precision machined contact tips. Fits Forney 304, 306 and 308 MIG welders and Tweco, Binzel and Clarke MIG guns.
View Details
$27.918
1" .035MIG CONTACT TIP
Precision machined contact tips. Fits Forney 304, 306 and 308 MIG welders and Tweco, Binzel and Clarke MIG guns.
View Details
$14.49
FLAT SOAPSTONE
Flat soapstone used for marking and outlining welds. 3 per pack. 3/16" x 1/2" x 5".
View Details
$26.391
25LB MAGNET HOLDER
Strong non-switchable magnetic support jig sticks to any iron object. Includes 45 Deg., 90 Deg. and 135 Deg. angles. Excellent "3rd hand" for welding, soldering, assembly, pipe installation, marking, floating and separating thin metal stacks.
View Details